Trashcaster guitar (part 3) – Red or Dead

After stripping off the pink paint from my Trashcaster guitar, I found some traces of the original paint underneath. The guitar had once been a nice shade of fiesta red. I also found this photo of an old Vox Consort on the interweb…

I’m pretty certain now that my body started off as a Consort like the one above. It looks like someone cut down the pickguard, which was presumably damaged like the one in the photo.

After stripping and sanding back to the wood, I sprayed the body with several coats of red nitrocellulose lacquer from Rothko & Frost (who give an excellent service). These lacquers are nice to use as you can build up several thin coats in a day. The Trashmaster now looks rather smart!

The paint is just transparent enough to let a little of the grain show through. For a high gloss finish it should be given a few layers of clear lacquer, but I’m aiming for the less shiny look of budget 60s guitars so will probably leave it. The scratchplate is less than mint, and so a perfect body may look a bit incongruous. The replacement chrome control plate came from a Fender Jazz bass, adjusted slightly with a file to take off some pointy edges.

The extant screw holes in the body didn’t fit a standard neck plate, so I’ve used these ferrules and screws from StewMac. They work very well and solve the problem. Also, the original tremolo bridge was missing. I have replaced it with a used hardtail bridge from ebay (£6!), and machined a brass block to fill the hole where the vibrato spring must once have been. Perhaps that will give a little more sustain too.

Nearly done, and what the guitar needs now is a logo to stop the headstock looking quite so naked. Rothko & Frost also supply custom vintage style logos for a very fair price, and here is one that they printed for the Trashcaster. It now just needs a couple of coats of clear lacquer to protect it, and everything can go back together again.